| Company Profile | Agni Fiber Boards (P) Ltd manufactures a variety of Non-Asbestos structural that combine high strength and excellent Thermal Insulating characteristics for use in a variety of heat processing, fire protection and electrical resistance applications.
This is high strength machinable Non- Asbestos grade thermal and electrical insulation board suitable for applications requiring high mechanical strength at high temperature. Agni Fiber Boards Pvt. Ltd. manufactures variety of FRP Epoxy Pultruded profiles for electrical insulations that combine high strength and excellent electrical insulating characteristics for use in a variety of electrical products, like transformers, chocks, switchgears, lightening arrestors, OLTC, Antennas, cable trays, and motor wedges. |
 Syndanio Sheets |
| Epoxy FRP Pultruded Profiles & Fasteners |
| Agni Boards |
| Insulators |
| Insulation Material |
| Electrical Insulation Material |
| Thermal Insulation Boards |
| Insulation |
| FRP Fasteners |
| Syndanio | | FRP Epoxy Pultruded Dog bones are being used as a dovetail spacer in Coil winding assembly in Dry Type transformers. FRP Corner Angles Epoxy Pultruded are being use in manufacturing Dry Type transformers in coil winding assembly. FRP Epoxy Pultruded Flats are being used as a dovetail spacer in coil winding assembly in transformer and as well as terminal plate in Switchgear equipment. FRP Epoxy Pultruded Hat Sections are being used in coil winding assembly of transformers. FRP Epoxy Pultruded rods are being used as electrical insulation material in Off load tap changer / off load tap changer, lighting arrestors. FRP epoxy pultruded tubes are being used for Protections of cables & MS tie- rod in electrical industries. FRP Angle are being used in producing Cable trays and ladders, FRP Angle are joint with FRP Angle and Flats with FRP Fasteners. By using FRP Threaded Rod / Nut, FRP flat /strips are being used for covering copper wire leads which are fixed with FRP threaded rod / nut. FRP Epoxy Pultruded Studs are being use for electrical insulation in Switchgears, transformers. FRP Nuts are being used during assembly of threaded rod stud or bolt. FRP Bolts are being used in FRP Cable trays joints, Ladders and FRP Cooling Tower as fasteners because of non-corrosive & non-metallic properties. |
| Company Products/Services |
| FRP Pultrusion |
| FRP Fastener |
| FRP Nut |
| FRP Stud |
| Hex Bolt | | Contact us |
| Contact Person : |
Rachana Panchal |
| Address : | 990/3/4, GIDC, Makarpura. |
| Telephone : | 91-265-2646121 |
| Fax : | 91-265-2634531. |
| E-Mail : |
|
|
|
|
| 
Home
|